Wireless Thermostat Programmable Electric Plug In LCD Temperature Remote Control

Description

Wireless Thermostat Programmable Electric Plug In LCD Temperature Remote Control
Item detailed information:
Temperature Sensor: Ambient temperature is detected automatically by the high-precision temperature sensor on the receiver socket. When current temperature reach to target temperature, the thermostat plug stop heating/cooling to measure the temperature to stay comfortable.
Plug and play: No need to install, automatic learning code. Plug your portable heating/cooling unit into the thermostat outlet and press the button by remote control to turn it on/off.
Easy to read: Accurate display for LCD display with backlight. The remote control can be held in hand, placed on a table or mounted on a wall. Low Battery Warning. The power failure will not affect the settings. ℃ / ℉ Icon flashes when the battery is lower than 2.7V.
Wide Applications: The smart outlet thermostat is widely used for space heater, portable heater, wall panel heater, oil-filled radiator, electric fireplace heater, evaporative cooler, swamp cooler, attic fan, window air conditioner, etc.
Multiple Safety Protection: The casing of the plug-in thermostat is made of flame retardant PC material, 3-Prong socket with grounded terminal, max load current up to 15A, over high and low-temperature and sensor failure alarms make it safe and reliable.
Wireless Thermostat OPS100N+OTS100N
This wireless thermostat is intended for automatic control of electric heating or cooling appliances and consists of 2 components: A remote control with integrated temperature sensor and a plug-in socket unit. The remote control automatically detects the ambient temperature and sends a signal to the plug every 20 seconds to turn the connected heating or cooling unit ON/OFF as your preset target temperature, maintains a stable room temperature for comfort and energy savings.
Package included:
1x Remote Control (thermosat)
1x Plug
1x User Manual (EN)
Why choose Hycency wireless plug-in thermostat?
Measure Temperature at the Ideal Place
Conventional plug-in thermostats often measure the room temperature inaccurately, partly due to the heat from the plug itself and partly due to being too close to the heater/cooler, but wireless plug-in thermostat is the ideal solution to this defect, as the temperature is detected by the remote control and not by the plug.
Heating & Cooling Mode
Outlet thermostat allows you to program at temperature range 32-158℉(0-70℃). It comes with heating and cooling mode, suitable for most heaters and coolers with plugs, such as space heater, oil-filled radiator, wall panel heater, electric fireplace heater, evaporative cooler, swamp cooler, attic fan, window air conditioner, etc.
Easy to Use
Plug and play, no installation or wiring required. Wide viewing angle LCD screen displays heating or cooling mode, current temperature and target temperature. Remote programming on the remote control, no need to unplug. Ideal for some hard-to-reach power outlets.
Multi-Channels
One remote can control multi plugs(less than 66ft). For instance, you can use multi heaters in a room with only one remote control. Tips: Matching multiple plugs just repeats the method of matching the first plug. It also features low battery alert, system reset, and temperature calibration
Specification
Remote Control - Transmitter
CURRENT temp. range: 0.0℃~70℃ or 32.0℉~158.0℉
TARGET temp. range: 0.0℃~70℃ or 32.0℉~158.0℉
CURRENT Temperature resolution: ±1℃/℉
Transmission Frequency: 433.92MHz
Maximum Range: 66ft in open area
Batteries Required: 2pcs*1.5V AAA batteries (Not included)
Stand on table or hang on wall
Plug - Receiver
US type: 120V/15A/60Hz, 1800W Max
evaporative cooler thermostat
Celsius and Fahrenheit Switch
Press -/+ buttons for 3 seconds, target temp will vanish, enter manual mode.
In operating interface, press and hold -/+ together for 5 seconds to reset the system.
After a few seconds, the HEAT/COOL icon flashes, press -/+ to select desired mode, then press and hold -/+ together for 3 seconds or wait 10 seconds to confirm and proceed to temp setting.
The temp system icon flashes, press -/+ button to select Celsius or Fahrenheit, then press and hold -/+ together or wait 10 seconds to confirm and proceed to operation interface.
Free Shipping: within the 48 U.S. states
Shipment only to the lower 48 states. We do NOT ship to PO Boxes
Returns:
We offer a 30 day return policy from the receiving date.
All items purchased must be returned in the same condition as they were delivered in.
Items defective upon receipt must be packaged in their retail packaging as if new and returned with a detailed description of the problem.