Stuart Microtitre Plate Shaker Incubator, SI505 - BRAND NEW! FREE SHIPPING!

Description

Stuart Microtiter Plate Shaker Incubator S1505
This is a open box - item is brand new never used- there is a small area of manufacturing glue in the glass door in the bottom left corner that doesn't effect the operation of the unit whatsoever. It must have been left there when the unit was manufactured. It's about 1-2 inches. Although you can see through it, the area is not blocking the view of anything inside the unit.
Please see photos
Ideal shaking action for microtiter plates
Combined Incubator shaker
Optimized performance to minimize sample evaporation
Digital display for temperature and speed
Integrated timer
Retractable platform for easy loading and unloading
Also available with IQ/OQ documentation
The SI505 has been designed specifically to combine a bench top laboratory incubator with the specific mixing action required for microtiter plates.
Shaking is ideal for mixing microtitre plates, combining a high speed action between 250 and 1250rpm with a tight orbit of 1.5mm. This enables even the smallest of vessels to adequately mix, be it well plates or microtubes. The SI505 has independent control of speed and temperature to avoid accidental temperature adjustment. Speed is microprocessor controller and set via the digital LED control panel. The unit also incorporates a versatile timer, which can be set from 1 second to 9 days, once the timer has run down, an alarm will sound and the shaking action will cease, for safety reasons the incubator will continue to run.
The temperature of the incubator can be set, via the digital LED control panel, between ambient temperature +7oC and 60oC. Careful control of the air distribution within the incubator ensures temperature uniformity throughout the sample chamber. To minimize sample evaporation the SI505 is supplied with stainless steel water trays, these are strategically placed within the unit to maintain a humidity of up to 80%, thus dramatically reducing sample evaporation over a 24 hour period.
The SI505's stainless steel platform is retractable, this allows easier access to samples at the back of the incubator. During operation the platform is securely locked in place, but can be easily released when required. The platform will comfortably and securely accommodate up to four microtiter plates on the non slip mat. Or sample tube racks are available which will accommodate all common tube sizes.
The SI505 also features a USB connection which allows the incubator to be connected to a PC for long term monitoring of the incubator temperature, over night of weekends for example.
Temperature range
Ambient + 7°C to 60°C
Samples
4 x Microtiter plate or 2 x microtube racks
Temperature display resolution
0.1°C
Temperature fluctuation
± 0.5°C at 37°C
Temperature variation
<0.6°C at 37°C
Temperature precision
± 0.5°C at 37°C
Speed range
250 to 1250rpm
Speed control
Digital set in 10rpm increments
Timer
min/sec, hour/min, days/hours
Orbit diameter, mm
1.5
Platform size, mm
220 x 220
Relative humidity
~80% (using water trays)
Internal dimensions, mm (w x d x h)
307 x 300 x 190
Maximum load, kg
1
Overall dimensions, mm (w x d x h)
361 x 405 x 430
Net weight, kg
22.5
Heater power, W
200W
Electrical supply
230V, 50Hz, 250W
IP Rating
31
Model
Description
SI505
Microtiter plate shaker incubator
SSM51
Tube holder for 1.5ml tubes
SSM52
Tube holder for 0.5ml tubes
SSM53
Tube holder for 0.2ml tubes
SI505/IQOQ
Microtitre plate shaking incubator with IQ/OQ documentation