Aquaponic Bell Siphon Kit 6" MEDIA Mini Garden Dutch Bucket 10,000+ Siphons Sold

Description

Aquaponics or Hydroponics Fail Safe Auto Bell Siphon Kit For Shallow Grow Beds 6" Media or Less
We have had such good results with this simple design in our aquaponics system in so many sizes that we have decided to make them available for sale here in our Ebay store. This size is intended for a mini bucket garden size 5"-6" deep media grow bed x about 2-4 square feet. If you need one for your Barrelponics or IBC size system or a shallow but larger grow bed just click on my store symbol above and check out the other sizes we list there. This size started as a custom order request for a mini barrelponics set up made from 5 gal buckets and we fell in love with the idea so here it is for anyone to enjoy.
We realize that many of you can make your own but it does take the right tools and pipe, etc which can really add up. Unless you are going to need 10 or more like we did, it may not pay to make your own.
If you are wondering how we can deliver these siphons at such a great price it is because we are all set up for high production. In other words we have set aside a number of our tools such as 2 drill presses, a 12" sliding compound saw, a router table and an entire corner of our shop not to mention our special custom jigs just to make these siphons at a price you can afford. Why? Because we love Aquaponics and love helping folks become food independent NOW before TSHTF. Yes we believe in being prepared. Who doesn't these days?
What you get is:
One 2" pvc gravel shield x 7" High and SLOTTED for maximum drain and maximum filtering as well as easy root cutting. Glued down gravel guards cannot do that and are a bad idea in our experience.
One 1 1/4" pvc NO CLOG bell x 6.5" high with cap and pull handle, (looks very cool and so easy to lift the bell for check ups)
One pair male and female threaded adapters with "o"ring to match for the bulkhead adapter
Two 1/2" 90s
One 1 1/2", one 2" and one 3" and one 4"
piece
of 1/2" pvc pipe and you can swap them around for depth adjustment.
One 1/2" to 1" adapter for the very important "Bernoulli effect" which allows for a pretty big swing in pump volume.
Basically what you see in the first photo. These are ready to go. All you do is slip them together and install them in your growbeds in a clean 7/8" hole.
Cement not included and not necessary until it is "dialed in" The worst thing you can do is to glue things before they are all tested and ready to go permanent. Take my word for that:-) The first 2 that I made were about an inch too high for the 12" of gravel I planned to use. Having glued it up I would have to remove the gravel and all just to shorten the down tube. There is really no need to glue any of the parts located above the bulkhead fittings, just below and only then if you feel it is needed.
PLEASE write me with any questions BEFORE you commit to purchase to save us both time and money.
Thanks for looking and remember "Aquaponics Rules!" Grow all your own fresh fish and veggies all year round. We grow Trout and organic veggies for our family right in our own greenhouse year round. Like us on FB at Smoky Mountain Aquaponics and check out our "ongrowing" system. Lots of pics and we are always trying new ideas and bring the best ones to our customers and followers.