7.5HP Rotary Phase Converter Quick Build Kit

Description

Brand new phase converter kit, to be used in conjunction with a 10 hp three phase motor. With this setup you will have a 10 hp rotary phase converter, your 10 hp motor should be rated at 230volt or 230/460volt and a rpm of 17XX or 36XX.
This kit includes the following:
-Pre-Drilled Electrical enclosure to house the components
-Mounting hardware to mount the components within the enclosure
- Pre-cut wire with terminated ends to connect all of the components
-Starter contactor for L1 and L2 input power
-Start capacitor circuit contactor
-Heavy duty run capacitors rated at 370vac to balance the generated leg from L1 and L2
-Heavy duty start capacitor rated at 250vac
-Heavy duty contact voltage sensing relay that controls the starting circuit of the phase converter ( this design is used by many of the top converter manufactures)
-Extra large terminal block to connect to your idler motor and three phase equipment.
-Resistor to discharge the capacitors when the system is turned off
-On/Off switch
-Wiring schematic/ Directions
Items that the customer will need to supply:
-7.5 hp motor should be rated at 230volt or 230/460volt and a rpm of 17XX or 34XX.
- I also repair and service all types and brands of phase converters.
-See my other listings for basic converter kits, Quick build phase converter kits, and complete phase converter panels.
-I also sell complete converters
-If you need help with sizing or have any other questions feel free to give me a call.